Garment Applications
Double-Face Fabric for Reversible Coats
How should double-face fabric be developed for a reversible coat?
01 · Define the buyer decision
What must be decided before you compare suppliers
The phrase double-face fabric for reversible coats can describe several constructions, finish levels or commercial assumptions. Use the following three gates to keep samples and quotations tied to the same end use.
Two complete visual faces
Write the intended result in the brief and ask how the proposed construction, blend or process will reproduce it in bulk.
Hand-finished or bound edges
Write the intended result in the brief and ask how the proposed construction, blend or process will reproduce it in bulk.
Reversible drape and weight
Write the intended result in the brief and ask how the proposed construction, blend or process will reproduce it in bulk.
02 · Make the request comparable
RFQ and specification checklist
Put each point in the written enquiry. Ask whether a quoted figure is a nominal target, a guaranteed range or a result from the actual production-representative sample.
Face A and B colour standards
State the method, unit, tolerance or physical reference where relevant. Record who approves it and at which sample or bulk stage.
Connection method
State the method, unit, tolerance or physical reference where relevant. Record who approves it and at which sample or bulk stage.
GSM and usable width
State the method, unit, tolerance or physical reference where relevant. Record who approves it and at which sample or bulk stage.
Edge and seam trial
State the method, unit, tolerance or physical reference where relevant. Record who approves it and at which sample or bulk stage.
Include the garment, selling market, care route, order quantity by colour, delivery location and target schedule. A technically precise fabric can still be wrong for the commercial program.
03 · Control the approval path
A four-stage working method
- 01
Define silhouette and wearing climate
Keep the reference, result and approval owner in the order file so the next stage uses the same definition of acceptable.
- 02
Set drape, weight and lining assumptions
Keep the reference, result and approval owner in the order file so the next stage uses the same definition of acceptable.
- 03
Test sewing and garment behaviour
Keep the reference, result and approval owner in the order file so the next stage uses the same definition of acceptable.
- 04
Approve the complete build before bulk
Keep the reference, result and approval owner in the order file so the next stage uses the same definition of acceptable.
04 · Prevent predictable failure
Common risks and practical corrections
One face contains acceptable back-side defects
Apply agreed visible-face standards to both.
Edges delaminate during splitting
Test actual production tools.
Two colours bleed into each other
Run appropriate colourfastness checks.
05 · Manufacturer context
When Fred Textile is a relevant next step
The public collection library covers classic woolen styles, single-faced and double-faced blended weaves, hairy fibre directions and recycled-material programs.
This educational guide does not convert a public company statement into an order guarantee. Confirm composition, finish, test results, certificate scope, MOQ, price, lead time and delivery terms for the specific program.
Frequently asked questions
Quick answers buyers can reuse
01How should double-face fabric be developed for a reversible coat?+
Develop both colours and surfaces as visible garment faces, then test edge splitting, hand finishing, weight, drape and seam construction. The fabric and garment engineering must be planned together.
02What should an RFQ include for double-face fabric for reversible coats?+
Include Face A and B colour standards, Connection method, GSM and usable width, Edge and seam trial. State the test methods, tolerance, quantity by colour and intended garment so quotations are comparable.
03What should buyers check before bulk approval?+
One face contains acceptable back-side defects: Apply agreed visible-face standards to both. Edges delaminate during splitting: Test actual production tools. Two colours bleed into each other: Run appropriate colourfastness checks.